IP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
579
ip debug traceconfig
Display/Modify IP stack trace configuration.
SYNTAX:
ip debug traceconfig [input = <{none|label|-telnet|-host|-
broadcast|all}>]
[forward = <{none|label|-telnet|-host|-
broadcast|all}>]
[output = <{none|label|-telnet|-host|-
broadcast|all}>]
[drop = <{none|label|-telnet|-host|-broadcast|
all}>]
[path = <{none|label|-telnet|-host|-broadcast|
all}>]
[mode = <{line|dump}>]
[arp = <{none|all}>]
where:
input Define the packets that will be traced. OPTIONAL
forward Define the packets that will be traced. OPTIONAL
output Define the packets that will be traced. OPTIONAL
drop Define the packet drops that will be traced. OPTIONAL
path Define the packet that will be path-traced. OPTIONAL
mode Packet dump method. OPTIONAL
arp Define the arp packets that will be traced. OPTIONAL