ATM COMMANDS
64
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
atm oam modify
Modify the ATM OAM data blocking mode.
SYNTAX:
atm oam modify port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
blocking = <{disabled|enabled}>
where:
port The port for which OAM blocking is configured. REQUIRED
blocking Enable/disable OAM blocking. REQUIRED
To Next Page
Loading...
Need help?
General
