IPSEC COMMANDS
682
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
ipsec peer vpnserver modify
Configures a VPN server configuration group
SYNTAX:
ipsec peer vpnserver modify name = <>
[push_ip = <{disabled|enabled}>]
[iprange = <ip-range>]
[netmask = <ip-mask(dotted or cidr)>]
[primdns = <ip-address>]
[secdns = <ip-address>]
[primwins = <ip-address>]
[secwins = <ip-address>]
[domain = <quoted string>]
[xauthpool = <>]
[servertype = <{generic|cisco}>]
where:
name The name of the VPN server descriptor REQUIRED
push_ip Push Virtual IP Address to client regardless of whether it
requests one or not
OPTIONAL
iprange Range of IP addresses from which to allocate virtual address
to client.
OPTIONAL
netmask Netmask. OPTIONAL
primdns Primary DNS address. OPTIONAL
secdns Secondary DNS address. OPTIONAL
primwins Primary WINS address. OPTIONAL
secwins Secondary WINS address. OPTIONAL
domain Domain Name. OPTIONAL
xauthpool Name of XAuth User-Pool containing XAuth usernames &
passwords
OPTIONAL
servertype Behaviour compatible with this vendor OPTIONAL
To Next Page
Loading...
Need help?
General
