SNMP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
979
snmp group delete
Delete access group
SYNTAX:
snmp group delete groupname = <{SU_Group|V1ROGroup|V1RWGroup|
Basic_Group|Extended_Group|WanAdmin_Group}>
[contextname = <{""}>]
securitymodel = <{snmpv1|snmpv2c|usm}>
securitylevel = <{noAuthNoPriv|authNoPriv|
authPriv}>
where:
groupname Configure a name of a group. REQUIRED
contextname Configure a context name. OPTIONAL
securitymodel Configure the security model of the access control group to
be deleted.
REQUIRED
securitylevel Configure the security level of the access control group to
be deleted.
REQUIRED
To Next Page
Loading...
