ATM COMMANDS
52
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
atm debug vcstats
Display VC specific atm statistics.
SYNTAX:
atm debug vcstats port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
vpi = <number{0-31}>
[vci = <number{0-511}>]
[clear = <{disabled|enabled}>]
where:
port The port number for which statistics will be retrieved. REQUIRED
vpi The VPI number for which statistics will be retrieved. REQUIRED
vci The VCI number for which statistics will be retrieved. OPTIONAL
clear Clear the statistics after request. OPTIONAL
To Next Page
Loading...
Need help?
General
