IPSEC COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
649
ipsec connection options modify
Changes a connection options group.
SYNTAX:
ipsec connection options
modify
name = <>
[virtual_if = <string>]
[force_df = <{pass|force_set|force_clear}>]
[min_mtu = <number{0-1432}>]
[add_route = <{enabled|disabled}>]
[routed = <{enabled|disabled}>]
where:
name The name of the connection options group to change. REQUIRED
virtual_if Virtual interface name. OPTIONAL
force_df DF bit copy behavior. OPTIONAL
min_mtu Minimum MTU for this SA. OPTIONAL
add_route Add a route for this connection. OPTIONAL
routed Should this connection be routed OPTIONAL