DHCP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
189
dhcp server option instadd
Add a DHCP server option instance
SYNTAX:
dhcp server option instadd name = <string>
tmplname = <>
[policy = <{requested|always|rules}>]
[dynamic = <{disabled|enabled}>]
[maxuse = <number{1-255}>]
[enterprise = <number{1-2147483647}>]
[suboption = <number{1-254}>]
value = <Value : (type)value; type being 8-
bit, 16-bit, 32-bit, addr, >
where:
name The name of the DHCP server option instance. REQUIRED
tmplname The name of the DHCP server option template. REQUIRED
policy The transmit policy type for the DHCP server option
instance.
OPTIONAL
dynamic Enable/Disable option instance as dynamic. OPTIONAL
maxuse Maximum number of times an option instance can be used
in DHCP pools
OPTIONAL
enterprise The enterprise number (see http://www.iana.org/
assignments/enterprise- numbers)
OPTIONAL
suboption The suboption number OPTIONAL
value The value of the DHCP server option instance. REQUIRED
To Next Page
Loading...
Need help?
General
