ETH COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
455
eth oam loopback
Enable/disable E-OAM remote loopback for an interface.
SYNTAX:
eth oam loopback ifname = <{}>
[state = <{disabled|enabled}>]
where:
ifname The interface for which to enable/disable E-OAM loopback. REQUIRED
state Enable/disable E-OAM remote loopback. OPTIONAL
To Next Page
Loading...
