ETH COMMANDS
376
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
eth bridge ippriomap
Modify the IP priority mappings for a bridge.
SYNTAX:
eth bridge ippriomap [brname = <{bridge}>]
type = <{tos|dscp}>
tostable = <{Default|MinimizeDelay|
MaximizeThroughput|MaximizeReliability|
MinimizeCost}>
dscpidx = <{dscp_0_7|dscp_8_15|dscp_16_23|
dscp_24_31|dscp_32_39|dscp_40_47|dscp_48_55|
dscp_56_63}>
precedencemap = <string>
where:
brname The name of a bridge instance. OPTIONAL
type For which IP priority type to adapt the precedencemap. REQUIRED
tostable TOS table type to edit. REQUIRED
dscpidx Index in the DSCP table to edit. REQUIRED
precedencemap The IP priority precedence mapping values. REQUIRED
To Next Page
Loading...
Need help?
General
