Technicolor TG670 User Manual

SNMP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
1015
snmp user add
Add a snmp user.
SYNTAX:
snmp user add securityname = <string>
snmpengineID = <string>
authprot = <{usmNoAuthProtocol|
usmHMACMD5AuthProtocol|
usmHMACSHAAuthProtocol}>
[authpass = <string>]
privprot = <{usmNoPrivProtocol|
usmDESPrivProtocol|usmAESCfb128PrivProtocol|
usmAESCfb192PrivProtocol|
usmAESCfb256PrivProtocol}>
[privpass = <string>]
[storage = <{other|volatile|nonVolatile|
permanent|readOnly}>]
[targettag = <string>]
where:
securityname Configure a human readable string representing the name
of a user.
REQUIRED
snmpengineID Configure the authoritative SNMP engine's
administratively-unique identifier, specified as hexadecimal
numbers (00-ff) and delimited with colons. Or use the
default value 'localSnmpID' to refer to the snmpEngineID
of the local SNMP agent.
REQUIRED
authprot Configure the authentication protocol to be used on behalf
of this user.
REQUIRED
authpass Configure a human readable string representing the user's
authentication password. The password will be converted to
a key.
OPTIONAL
privprot Configure the privacy protocol to be used on behalf of this
user.
REQUIRED
privpass Configure a human readable string representing the user's
privacy password.
OPTIONAL
storage Configure the storage type. OPTIONAL
targettag Configure a human readable string used to select a set of
entries in the snmpTargetAddrTable for source address
checking.
OPTIONAL
nickdj.co.uk

Technicolor TG670 Specifications

General

Brand	Technicolor
Model	TG670
Category	Network Router
Language	English