DHCP COMMANDS
170
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
dhcp relay modify
Modify an entry from the DHCP forward list.
SYNTAX:
dhcp relay modify name = <{lan1_to_127.0.0.1|dmz1_to_127.0.0.1|
guest1_to_127.0.0.1}>
[addr = <ip-address>]
[intf = <{None|guest1|dmz1|wan1|lan1|Internet|
ipsec0}>]
[giaddr = <ip-address>]
[script = <>]
where:
name The forward entry name. REQUIRED
addr The DHCP server IP address. OPTIONAL
intf The name of the relay interface, 'None' to indicate no
interface is specified.
OPTIONAL
giaddr The giaddr field to be used in relayed DHCP packets. OPTIONAL
script Script to be run when the forward entry is hit. OPTIONAL
To Next Page
Loading...
Need help?
General
