Technicolor TG670 User Manual

ROUTER COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
897
router rip ifprimauthconfig
Specifies the used primary interface authentication
SYNTAX:
router rip ifprimauthconfig intf = <{Internet|dmz1|guest1|ipsec0|lan1|
wan1}>
type = <{none|simple|md5}>
password = <password>
id = <number{0-255}>
key = <password>
[generate-start = <UTC format dd/mm/yyyy
hh:mm:ss>]
[generate-stop = <UTC format dd/mm/yyyy
hh:mm:ss>]
[accept-start = <UTC format dd/mm/yyyy
hh:mm:ss>]
[accept-stop = <UTC format dd/mm/yyyy
hh:mm:ss>]
where:
intf Specifies the physical interface which is going to be
configured.
REQUIRED
type The type of authentication REQUIRED
password Rip simple authentication key REQUIRED
id Unique id number sent in clear text REQUIRED
key Rip MD5 authentication key REQUIRED
generate-start Specifies the time at which the MD5 key will start to be
generated
OPTIONAL
generate-stop Specifies the time at which a MD5 key will cease to be
generated
OPTIONAL
accept-start Specifies the time at which a MD5 key will start to be
accepted
OPTIONAL
accept-stop Specifies the time at which a MD5 key will cease to be
accepted
OPTIONAL
nickdj.co.uk

Technicolor TG670 Specifications

General

Brand	Technicolor
Model	TG670
Category	Network Router
Language	English