PPP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
813
ppp relay ifconfig
Modify an ethernet interface from the PPP relay agent list.
SYNTAX:
ppp relay ifconfig intf = <{bridge|ethoa_8_35|eth_wan1}>
hwaddr = <hardware-address>
where:
intf The ethernet intf to be added to the PPP relay agent list. REQUIRED
hwaddr The hardware address (e.g. Ethernet MAC address) of this
interface.
REQUIRED
To Next Page
Loading...
Need help?
General
