VOICE COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
1201
voice qos config
Configure the QOS parameters
SYNTAX:
voice qos config type = <{Signaling|Realtime}>
qosfield = <{DSCP|precedence}>
dscp = <{ef|af11|af12|af13|af21|af22|af23|
af31|af32|af33|af41|af42|af43|cs0|cs1|cs2|cs3|
cs4|cs5|cs6|cs7} or number>
precedence = <{routine|priority|immediate|
flash|flash-override|CRITIC-ECP|internetwork-
control|network-control} or number>
where:
type The type of traffic that needs qos REQUIRED
qosfield The QOS field to be used REQUIRED
dscp The DSCP value REQUIRED
precedence The precedence value REQUIRED
To Next Page
Loading...
Need help?
General
