FIREWALL COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
515
firewall rule debug clear
Clear rule statistics.
SYNTAX:
firewall rule debug clear [chain = <chain name>]
[index = <number>]
Remove all host devices = <number>
where:
chain The name of the chain. OPTIONAL
index The index of the rule in the chain.Command: hostmgr clear OPTIONAL
Remove all host devices Syntax : clear REQUIRED
To Next Page
Loading...
Need help?
General
