IP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
561
ip Commands
ip arpadd Add an entry to the ARP cache of a broadcast IP
interface.
see page 563
ip arpdelete Delete an ARP entry. see page 564
ip arplist Display the ARP cache. see page 565
ip auto debug traceconfig Modify autoIP trace configuration see page 566
ip auto flush Flushes autoIP interfaces. see page 567
ip auto ifadd Creates a new autoIP interface. see page 568
ip auto ifattach Select and assign a link-local address to an
autoIP interface.
see page 569
ip auto ifconfig Configures an autoIP interface. see page 570
ip auto ifdelete Deletes an existing autoIP interface. see page 571
ip auto ifdetach Release the link-local address for the given
autoIP interface.
see page 572
ip auto iflist Shows the autoIP interfaces. see page 573
ip config Display/Modify global IP stack configuration. see page 574
ip debug httpprobe Send HTTP probe to measure the round trip
time taken to connect and access
see page 576
ip debug sendto Send UDP packets. see page 577
ip debug stats Display statistics. see page 578
ip debug traceconfig Display/Modify IP stack trace configuration. see page 579
ip flush Flush all static IP parameters. Dynamic info (e.g.
from PPP links) remains.
see page 580
ip ifattach Attach an IP interface. see page 581
ip ifconfig Modify an IP interface configuration. see page 582
ip ifdelete Delete an IP interface. see page 583
ip ifdetach Detach an IP interface. see page 584
ip iflist Display all IP interfaces. see page 585
ip ifwait Wait for a status change of an IP interface. see page 586
ip ipadd Assign an IP address to an IP interface. see page 587
ip ipconfig Modify an IP address configuration. see page 588
To Next Page
Loading...
Need help?
General
