MBUS COMMANDS
744
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
mbus listobjects
Display the object instances
SYNTAX:
mbus listobjects [dmtree = <{igd|atomic|system}>]
[path = <quoted string>]
[type = <{indexpath|keystrpath}>]
[output = <{tree|list}>]
[showflags = <{disabled|enabled}>]
where:
dmtree Select mbusd datamodel tree. OPTIONAL
path Fully qualified mbus path to list. OPTIONAL
type Path type (default = indexpath) OPTIONAL
output List output type OPTIONAL
showflags Display object flags (Clean or Dirty / Persistent or Volatile) OPTIONAL
To Next Page
Loading...
Need help?
General
