MBUS COMMANDS
734
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
mbus client register
Register cli client to mbus
SYNTAX:
mbus client register [dmtree = <{igd|atomic|system}>]
[type = <{indexpath|keystrpath}>]
[dlink = <{local_ipc|remote_inet}>]
[mbusd_addr = <quoted string>]
[refresolv = <{disabled|enabled}>]
[state_events = <{disabled|enabled}>]
where:
dmtree Select mbusd datamodel tree. OPTIONAL
type Path type (default = indexpath) OPTIONAL
dlink Daemon link (default = local_ipc) OPTIONAL
mbusd_addr Daemon address (ip addr for inet) OPTIONAL
refresolv Use reference resolving (default=disabled) OPTIONAL
state_events Context should be notified when the MBus state changes
(default=disabled)
OPTIONAL
To Next Page
Loading...
Need help?
General
