CONFIG COMMANDS
90
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
config load
Load saved or default configuration.
SYNTAX:
config load [load_ip = <{enabled|disabled}>]
[defaults = <{disabled|enabled}>]
[flush = <{enabled|disabled}>]
[echo = <{disabled|enabled}>]
[filename = <string>]
where:
load_ip Load IP settings or not. OPTIONAL
defaults Load default instead of saved configuration. OPTIONAL
flush Flush current configuration before loading new one. OPTIONAL
echo Echo each command string when loaded. OPTIONAL
filename Configuration filename. OPTIONAL
To Next Page
Loading...
Need help?
General
