CONNECTION COMMANDS
94
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
connection appinfo
Display CONN/NAT application specific info
SYNTAX:
connection appinfo application = <{IP6TO4|PPTP|ESP|IKE|SIP|
JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|SNMP_TRAP|
FTP}>
where:
application The name of a CONN/NAT application helper as listed by
':connection applist'.
REQUIRED
To Next Page
Loading...
Need help?
General
