Telit Wireless Solutions ME310G1 - AT#FTPTO - FTP Time out

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 757 of 1039 2021-09-23
Not Subject to NDA
3.16.18. AT#FTPTO - FTP Time Out
Set the FTP time out.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#FTPTO=[<tout>]
Set command sets the time out used when opening either the FTP control
channel or the FTP traffic channel.
Parameter:
Name
Type
Default
Description
<tout>
integer
100
time out in 100 milliseconds units
Value:
100÷5000
:
hundreds of milliseconds
AT#FTPTO?
Read command returns the current FTP operations time out in the format:
#FTPTO: <tout>
AT#FTPTO=?
Test command returns the supported values of parameter <tout>.