Telit Wireless Solutions ME310G1 - AT+CALA - Alarm Management

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 476 of 1039 2021-09-23
Not Subject to NDA
3.8.2. AT+CALA - Alarm Management
This command is related to the alarm management.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT+CALA=<time>[,<n>[,<type>[,<text>[,<recurr>[,<silent>]]]]]
Set command stores in the internal Real Time Clock of the module an
alarm time with respective settings.
It is possible to set up a recurrent alarm for one or more days in the week.
4. Currently just one alarm can be set.
5. Alarms are not supported after disconnecting from power. Coin cell
are supported. In case of a power cut, alarm will be deleted and
needs to be re-set.
When the RTC time reaches the alarm time then the alarm starts, the
behavior of the module depends on the setting <type> and if the module
was already ON at the moment when the alarm time had come.
Parameters:
Name
Type
Default
Description
<time>
string
-
current alarm time as quoted string in
the format:
"yy/MM/dd,hh:mm:ss±zz"
Refer to +CCLK for the string meaning.
Empty string (+CALA="") deletes the
current alarm and resets all the +CALA