Telit Wireless Solutions ME310G1 - AT#TXCAL4 G - Change Max TX Power Level for a Supported Band

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 124 of 1039 2021-09-23
Not Subject to NDA
3.2.2.48. AT#TXCAL4G - Change Max TX Power Level for a Supported Band
Set command change the maximum power level for the band specified.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#TXCAL4G=<band>[,<txPwrLev>]
Parameters:
Name
Type
Default
Description
<band>
integer
-
number of the LTE band whose TX
maximum power level must be
changed. To know its range, use Test
command.
<txPwrLev>
integer
-
maximum tx power level for the band
specified expressed in 1/16dBm.
Example: 368 = 23dBm. To know its
range, use Test command.
If <txPwrLev> is not specified, the
default value for maximum TX power
level is set for the band <band>
AT#TXCAL4G?
Read command returns the bands supported and the maximum power
level set for each band in the format:
#TXCAL4G: <band>,<txPwrLev>
#TXCAL4G: <band>,<txPwrLev>
#TXCAL4G: <band>,<txPwrLev>
#TXCAL4G: <band>,<txPwrLev>
#TXCAL4G: <band>,<txPwrLev>
...