Telit Wireless Solutions ME310G1 - AT#SMSMOVE - Move Short Message to Other Memory

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 450 of 1039 2021-09-23
Not Subject to NDA
3.6.24. AT#SMSMOVE - Move Short Message to other Memory
This command moves selected Short Message from current memory to destination
memory.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SMSMOVE=<index>
Execution command moves selected Short Message from current memory
to destination memory.
Parameter:
Name
Type
Default
Description
<index>
string
-
message index in the memory selected by
+CPMS command. It can have values form 1
to N, where N depends on the available
space, see +CPMS.
If the destination memory is full, an error is returned
AT#SMSMOVE?
Read command reports the message storage status of the current
memory and the destination memory in the format:
#SMSMOVE:<curr_mem>,<used_curr_mem>,<total_curr_mem>,
<dest_mem>,<used_dest_mem>,<total_dest_mem>
Additional info:
Parameters: