Telit Wireless Solutions ME310G1 - Mqtt-Sn; AT#MQSNEN - Enable MQTT-SN Feature

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 912 of 1039 2021-09-23
Not Subject to NDA
3.24.12. MQTT-SN
3.24.12.1. AT#MQSNEN - Enable MQTT-SN feature
This command initializes a MQTT-SN client and allocates the necessary resources.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#MQSNEN=<instanceNumber>,<enable>
Set command enables/disables the MQTT-SN client for further
configuration and usage
Parameters:
Name
Type
Default
Description
<instanceNumber>
integer
N/A
Selects the client instance to
activate or deactivate. The list of
available clients is obtained with
the read command.
To know maxClients value use
test command.
Value:
1÷maxClients
:
client instance Number
<enable>
integer
N/A
Sets if the selected client must
be activated or deactivated
Values:
1
:
Enable
0
:
Disable