Telit Wireless Solutions ME310G1 - AT#BND - Select Band

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 225 of 1039 2021-09-23
Not Subject to NDA
3.3.18. AT#BND - Select Band
This command selects RF bands
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#BND=<band>[,<UMTS_band>[,<LTE_band>
[,<TDSCDMA_band>[,<LTE_band_over_64>]]]]
Set command selects the current GSM and LTE (CATM and NBIot) bands.
CATM and NBIot bands are set to the same <LTE_band> and
<LTE_band_over_64> values.
Parameters:
Name
Type
Default
Description
<band>
integer
-
GSM band selection.
For 4G only products:
<band>
/
0
dummy parameter
For 4G/2G products
supporting GSM 900 MHz,
DCS 1800 MHz, PCS 1900 MHz
and GSM 850 MHz:
<band>
GSM bands
0
GSM 900MHz +
DCS 1800MHz
1
GSM 900MHz +
PCS 1900MHz
2
GSM 850MHz +
DCS 1800MHz