Telit Wireless Solutions ME310G1 - AT#MSCLASS - Multislot Class Control

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 607 of 1039 2021-09-23
Not Subject to NDA
3.14.5. AT#MSCLASS - Multislot Class Control
Set command sets the GPRS multislot class.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#MSCLASS=[<class>[,<autoattach>]]
Parameters:
Name
Type
Default
Description
<class>
integer
33
GPRS multislot class.
Values:
1÷12
:
class
30÷33
:
class
<autoattach>
integer
0
specify when the new
multislot class will be
enabled.
Values:
0
:
the new multislot class is enabled only at the
next detach/attach or after a reboot.
1
:
the new multislot class is enabled immediately,
automatically forcing a detach / attach procedure
only in case of GSM network registered
AT#MSCLASS?
Read command reports the current value of the multislot class in the
format:
#MSCLASS: <class>