Telit Wireless Solutions ME310G1 - Mqtt; AT#MQEN - Enable MQTT Feature

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 888 of 1039 2021-09-23
Not Subject to NDA
MQTT
3.24.1. AT#MQEN - Enable MQTT Feature
This command initializes a MQTT client and allocates the necessary resources.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#MQEN=<instanceNumber>,<enable>
Set command enables/disables the MQTT client for further configuration
and usage.
Parameters:
Name
Type
Default
Description
<instanceNumber>
integer
N/A
selects the client instance to
activate or deactivate
Value:
1÷maxClients
:
client instance range. To know
maxClients value use test
command
<enable>
integer
N/A
selects if client must be
activated or deactivated
Values:
0
:
disable
1
:
enable
AT#MQEN?
Read command returns the status of the MQTT stack in the format
#MQEN: <instanceNumber>,<enabled>