Telit Wireless Solutions ME310G1 - AT+CLIP - Calling Line Identification Presentation

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 308 of 1039 2021-09-23
Not Subject to NDA
3.3.48. AT+CLIP - Calling Line Identification Presentation
This command refers to the supplementary service CLIP (Calling Line Identification
Presentation) that enables a called subscriber to get the calling line identity (CLI) of the
calling party when receiving a mobile terminated call.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT+CLIP=[<enable>]
Set command enables/disables the presentation of the CLI (Calling Line
Identity).
If enabled the device reports after each RING the response:
+CLIP: <number>,<type>,"",128,<alpha>,<CLI_validity>
Parameter:
Name
Type
Default
Description
<enable>
integer
0
enable flag
Values:
0
:
disables CLI indication
1
:
enables CLI indication
Unsolicited fields:
Name
Type
Description
<number>
string
phone number of format specified by <type>
<type>
integer
type of address octet
Values: