Telit Wireless Solutions ME310G1 - AT#MQSNWCFG - Configure MQTT-SN Last will and Testament

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 922 of 1039 2021-09-23
Not Subject to NDA
3.24.12.5. AT#MQSNWCFG - Configure MQTT-SN last will and testament
This command sets Last Will and Testament for the selected MQTT-SN client
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#MQSNWCFG=<instanceNumber>,<will_flag>[,<will_retain>,<will_qos>,<will_t
opic>,<will_msg>]
Set command writes the parameters for the specified client
Parameters:
Name
Type
Default
Description
<instanceNumber>
integer
N/A
Selects the client instance. The
list of available clients is
obtained with AT#MQSNEN? or
the read command.
To know maxClients value use
test command.
Value:
1÷maxClients
:
client instance Number
<will_flag>
integer
0
Selects whether the client needs
to specify a Last Will and
Testament. If set to 0, this is the
last parameter to be set.
Values:
0
:
The client does not need to specify a Last
Will and Testament
1
:
The client needs to specify a Last Will and
Testament