Telit Wireless Solutions ME310G1 - AT#MQREAD - Read Messages Received from the MQTT Broker

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 909 of 1039 2021-09-23
Not Subject to NDA
3.24.11. AT#MQREAD - Read Messages Received from the MQTT Broker
This command reads the message payload from the queue slot provided.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#MQREAD=<instanceNumber>,<mId>
After command line is terminated with <CR>, the module responds
sending:
#MQREAD: <instanceNumber>,<topic>,<payload_len>,
then the module prompts the following characters sequence:
<less_than><less_than><less_than><carriage return><line feed> (IRA
60, 60, 60, 13, 10)
followed by the data
Parameters:
Name
Type
Default
Description
<instanceNumber>
string
N/A
selects the client instance to
activate or deactivate
Value:
1÷maxClients
:
client instance range. To know
maxClients value use test
command
<mId>
integer
N/A
message slot Id to be read. The
read operation will free the slot
resource.
Value: