Telit Wireless Solutions ME310G1 - AT+CEMODE - Set Mode of Operation for EPS

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 262 of 1039 2021-09-23
Not Subject to NDA
3.3.30. AT+CEMODE - Set Mode of Operation for EPS
This set command configures the mode of operation for EPS.
[1] 3GPP TS 24.301
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT+CEMODE=<mode>
Parameter:
Name
Type
Default
Description
<mode>
integer
N/A
mode of operation. The default value
depends on product and the support of
VoLTE.
Default value is 2 for the variants not
supporting VoLTE
UE modes of operation can be found in
standard [1]. Other values are reserved and
will result in an ERROR response to the set
command.
Values:
0
:
PS mode 2 of operation
1
:
CS/PS mode 1 of operation
2
:
CS/PS mode 2 of operation
3
:
PS mode 1 of operation
AT+CEMODE?