Telit Wireless Solutions ME310G1 - ATS4 - Response Formatting Character

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 133 of 1039 2021-09-23
Not Subject to NDA
3.2.3.5. ATS4 - Response Formatting Character
The command manages the character generated by the device as part of the header,
trailer, and terminator for result codes and information text.
ITU-T Recommendation V.25 ter
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
ATS4=[<char>]
Set command sets the value of the character generated by the device as
part of the header, trailer, and terminator for result codes and information
text, along with the S3 parameter.
Parameter:
Name
Type
Default
Description
<char>
integer
10
response formatting character (decimal
ASCII)
Value:
0÷127
:
response formatting character
If the value of S4 is changed in a command line the result code
issued in response of that command line will use the new value of
S4.
ATS4?
Read command returns the current value of S4 parameter.