Telit Wireless Solutions ME310G1 - AT+CRES - Restore Settings

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 395 of 1039 2021-09-23
Not Subject to NDA
3.6.8. AT+CRES - Restore Settings
Execution command restores message service settings saved by +CSAS command from
either NVM or SIM.
3GPP TS 27.005
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+CRES[=<profile>]
Parameter:
Name
Type
Default
Description
<profile>
integer
N/A
Defines which message service
profiles to restore.
Values:
0
:
restores message service settings from NVM
1÷n
:
restores message service settings from SIM. The n
value depends on the SIM.
Certain settings may not be supported by the SIM and therefore
they are always restored from NVM, regardless the value of
<profile>
If parameter is omitted the command restores message service
settings from NVM.
AT+CRES=?