Telit Wireless Solutions ME310G1 - AT#SI - Socket Info

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 691 of 1039 2021-09-23
Not Subject to NDA
3.15.22. AT#SI - Socket Info
This command is used to get socket information.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SI[=<connId>]
Execution command returns information about all sockets data traffic.
Parameter:
Name
Type
Default
Description
<connId>
integer
NA
socket connection identifier. Refer to
Additional info sections to have
information about the use of the <connId>
parameter
Value:
1÷conMax
:
socket connection identifier. conMax value is
returned by test command
Additional info:
If the execution command is used with the <connId> socket
identifier, it returns data traffic information on the selected socket.
The format of the returned message is:
#SI: <connId>,<sent>,<received>,<buff_in>,<ack_waiting>
Name
Type
Default
Description
<sent>
integer
-
total amount (in bytes) of data
sent since the last time the
socket connection identified by
<connId> has been opened