Telit Wireless Solutions ME310G1 - AT+CMEE - Report Mobile Equipment Error

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 95 of 1039 2021-09-23
Not Subject to NDA
3.2.2.33. AT+CMEE - Report Mobile Equipment Error
The command enables the use of result code.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+CMEE=[<n>]
Set command disables/enables the use of result code +CME ERROR: <err>
as an indication of an error relating to the +Cxxx command issued. When
enabled, device related errors cause the +CME ERROR: <err> final result
code instead of the default ERROR final result code. ERROR is returned
normally when the error message is related to syntax, invalid parameters
or DTE functionality.
Parameter:
Name
Type
Default
Description
<n>
integer
0
enables/disables +CME ERROR: <err> result
code and selects the format
Values:
0
:
disable
1
:
enable and use numeric<err> values
2
:
enable and use verbose <err> values
The detailed description of <err> is available in section "ME Error
Result Code - +CME ERROR: <err>".
+CMEE has no effect on the final result code +CMS.