Telit Wireless Solutions ME310G1 - AT#CPSMS - Power Saving Mode Setting

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 1020 of 1039 2021-09-23
Not Subject to NDA
3.29.2. AT#CPSMS - Power Saving Mode Setting
This command enables/disables Power Saving Mode (PSM) mode.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#CPSMS=[<mode>[,<ReqPeriodicRAU>[,<ReqGPRSreadyTimer>
[,<ReqPeriodicTAU>[,<ReqActiveTime>[,<psmVersion>[,<psmThreshold>]]]]]]]
The set command controls the setting of the UEs power saving mode (PSM)
parameters. The command controls whether the UE wants to apply PSM or
not, as well as the requested extended periodic RAU value and the requested
GPRS READY timer value in GERAN, the requested extended periodic TAU
value in E-UTRAN and the requested Active Time value.
This command, unlike the +CPSMS command, accepts the parameters in
integer format.
Parameters:
Name
Type
Default
Description
<mode>
integer
0
disables or enables the use
of PSM in the UE.
Values:
0
:
disable
1
:
enable
<ReqPeriodicRAU>
integer
-
requested extended periodic
RAU value (T3312) to be
allocated to the UE in
GERAN. Parameter
expressed in sec.
<ReqGPRSreadyTimer>
integer
-
requested GPRS READY
timer value (T3314) to be
allocated to the UE in