Telit Wireless Solutions ME310G1 - AT#FTPCFG - FTP Configuration

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 760 of 1039 2021-09-23
Not Subject to NDA
3.16.20. AT#FTPCFG - FTP Configuration
This command sets the time-out used when opening either the FTP control channel or
the FTP traffic channel.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#FTPCFG=<tout>,<IPPignoring>[,<FTPSEn>[,<FTPext>]]
Parameters:
Name
Type
Default
Description
<tout>
integer
100
time out in 100 milliseconds units
Value:
100÷5000
:
hundreds of ms
<IPPignoring>
integer
N/A
enable or disable IP private
ignoring
Values:
0
:
No IP Private ignoring. During a FTP passive
mode connection client uses the IP address
received from server, even if it is a private IPV4
address.
1
:
IP Private ignoring enabled. During a FTP
passive mode connection if the server sends a
private IPV4 address the client doesn’t consider
this and connects with server using the IP
address used in #FTPOPEN.
<FTPSEn>
integer
0
disable FTPS security
Values: