Telit Wireless Solutions ME310G1 - AT#PADCMD - PAD Command Features

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 697 of 1039 2021-09-23
Not Subject to NDA
3.15.24. AT#PADCMD - PAD Command Features
This command sets features of the pending data flush to socket, opened with #SD
command.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#PADCMD=<mode>
Set command for features of the pending data flush to socket, opened with
#SD command.
Parameter:
Name
Type
Default
Description
<mode>
integer
N/A
enable/disable forwarding
Values:
0
:
Bit 1: disable forwarding
1
:
Bit 1: enable forwarding
Forwarding depends on character defined by #PADFWD.
Other bits are reserved.
AT#PADCMD?
Read command reports the currently selected <mode> in the format:
#PADCMD: mode
AT#PADCMD=?