Telit Wireless Solutions ME310G1 - AT+CLVL - Loudspeaker Volume Level

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 504 of 1039 2021-09-23
Not Subject to NDA
3.9.1.2. AT+CLVL - Loudspeaker Volume Level
This command allows to set the volume of internal loudspeaker audio output.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Common
profile
No
-
2
AT+CLVL=<level>
Set command is used to select the volume of the internal loudspeaker
audio output of the device.
Parameter:
Name
Type
Default
Description
<level>
integer
4
Loudspeaker volume.
Value:
0÷max
:
max value can be read by issuing the Test
command.
AT+CLVL?
Read command reports the current <level> setting of the loudspeaker
volume in the format:
+CLVL: <level>
AT+CLVL=?
Test command returns the supported values of parameter <level>.