Telit Wireless Solutions ME310G1 - AT#CIPHIND - Ciphering Indication

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 254 of 1039 2021-09-23
Not Subject to NDA
3.3.27. AT#CIPHIND - Ciphering Indication
This command enables/disables unsolicited result code for cipher indication.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#CIPHIND=[<mode>]
Set command enables/disables unsolicited result code for cipher
indication. The ciphering indicator feature allows to detect that ciphering
is not switched on and to indicate this to the user. The ciphering indicator
feature may be disabled by the home network operator setting data in the
SIM/USIM. If this feature is not disabled by the SIM/USIM, then whenever a
connection is in place, which is unenciphered, or changes from ciphered to
unenciphered or vice versa, an unsolicited indication shall be given to the
user. The format is:
#CIPHIND: <mode>
Parameter:
Name
Type
Default
Description
<mode>
integer
0
enable/disable #CIPHIND: unsolicited
result code
Values:
0
:
disable
1
:
enable
AT#CIPHIND?
Read command reports the <mode>,<cipher> and <SIM/USIM flag>:
#CIPHIND: <mode>,<cipher>,<SIM/USIM flag>
Additional info: