Telit Wireless Solutions ME310G1 - Packet Domain; AT+CGDCONT - Define PDP Context

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 599 of 1039 2021-09-23
Not Subject to NDA
Packet Domain
3.14.1. AT+CGDCONT - Define PDP Context
Define PDP Context.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CGDCONT=[<cid>[,<PDP_type>[,<APN>[,<PDP_addr>[,<d_comp>[,<h_comp>[,<I
Pv4AddrAlloc>[,<emergencyIndication>]]]]]]]]
Set command specifies PDP context parameter values for a PDP context identified
by the (local) context identification parameter, <cid>.
Parameters:
Name
Type
Default
Description
<cid>
integer
-
(PDP Context Identifier)
numeric parameter which
specifies a particular PDP
context definition.
1..max - where the value of
max is returned by the Test
command.
<PDP_type>
string
N/A
(Packet Data Protocol type)
a string parameter which
specifies the type of packet
data protocol.
Values:
"IP"
:
Internet Protocol
"IPV6"
:
Internet Protocol version 6