Telit Wireless Solutions ME310G1 - AT#M2 MBACKUP - M2 M Set Backup Feature

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 859 of 1039 2021-09-23
Not Subject to NDA
3.23.3. AT#M2MBACKUP - M2M Set Backup Feature
This command manages the M2M File System and backup partition.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#M2MBACKUP=<enable>
Set command sets/resets the backup status of the executable binary file.
Only the first starting file will be saved in backup partition.
Parameter:
Name
Type
Default
Description
<enable>
integer
0
set/reset the BACKUP permission
Values:
0
:
resets BACKUP status and backup partition
1
:
sets BACKUP status and backup will be performed
after reboot
AT#M2MBACKUP?
Read command reports the BACKUP status. The report has the following
format:
#M2MBACKUP: <enable>
AT#M2MBACKUP=?
Test command returns the allowed values for parameter <enable>.