Telit Wireless Solutions ME310G1 - AT#NIPDCONN - Open and Close a NIDD Connection

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 1008 of 1039 2021-09-23
Not Subject to NDA
3.27.2. AT#NIPDCONN - Open and Close a NIDD Connection
This command allows the TE to open and close a NIDD connection. It is supported by
modules with NBIoT technology.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#NIPDCONN=<mode>
Parameter:
Name
Type
Default
Description
<mode>
integer
0
open/close the NIDD connection
Values:
0
:
close the NIDD connection
1
:
open the NIDD connection
AT#NIPDCONN?
Read command reports the status of the NIDD connection, in the format:
#NIPDCONN: <status>
<status> has the same meaning and values of <mode> parameter.
AT#NIPDCONN=?
Test command reports the supported range of values for parameter
<mode>.