Telit Wireless Solutions ME310G1 - Ssl; AT#SSLCFG - Configure General Parameters of a SSL Socket

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 791 of 1039 2021-09-23
Not Subject to NDA
SSL
3.19.1. AT#SSLCFG - Configure General Parameters of a SSL Socket
This command configures SSL connection parameters.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#SSLCFG=<SSId>,<cid>,<pktSz>,<maxTo>,<defTo>,<txTo>[,<SSLSRingMode>
[,<noCarrierMode>[,<skipHostMismatch>[,<equalizeTX> [,<connTo
>[,<Unused1>]]]]]]
Set command allows configuring SSL connection parameters.
Parameters:
Name
Type
Default
Description
<SSId>
integer
1
Secure Socket Identifier
Value:
1
:
Until now SSL block manages only one
socket
<cid>
integer
-
PDP context identifier, see
+CGDCONT command.
<pktSz>
integer
0
packet size to be used by the
SSL/TCP/IP stack for data
sending
Values:
0
:
select automatically default value
(300)
1÷1500
:
number of bytes
<maxTo>
integer
90
exchange timeout or socket
inactivity timeout. In online
mode, if there is no data