Telit Wireless Solutions ME310G1 - AT#NTP - Calculate and Update Date and Time with NTP

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 718 of 1039 2021-09-23
Not Subject to NDA
3.15.33. AT#NTP - Calculate and Update Date and Time with NTP
The command handles the date and time update using NTP protocol.
[1] Standard RFC2030
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
10 s
2
AT#NTP=<NTPAddr>,<NTPPort>,<updModClock>,<timeout>[,<timeZone>]
Execution command permits to calculate and update date and time through NTP
protocol sending a request to a NTP server, see standard [1]. The command
returns an intermediate response having the following format:
#NTP: <time>
The <time> parameter is described in Additional info section.
Parameters:
Name
Type
Defaul
t
Description
<NTPAddr>
string
-
address of the NTP server.
This parameter can be either:
57. any valid IP address in the format:
"xxx.xxx.xxx.xxx" or
"xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xx
xx"
58. any host name to be solved with a
DNS query
<NTPPort>
intege
r
N/A
NTP server port to contact