Telit Wireless Solutions ME310G1 - AT#SGACTAUTH - PDP Context Authentication Type

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 638 of 1039 2021-09-23
Not Subject to NDA
3.15.2. AT#SGACTAUTH - PDP Context Authentication Type
This command sets the authentication type for IP Easy
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SGACTAUTH=<type>
Set command sets the authentication type for IP Easy, it has effect on the
authentication mode used by #SGACT command.
Parameter:
Name
Type
Default
Description
<type>
integer
1
authentication type for IP Easy
Values:
0
:
no authentication
1
:
PAP authentication
2
:
CHAP authentication
AT#SGACTAUTH?
Read command reports the current IP Easy authentication type, in the
format:
#SGACTAUTH: <type>
AT#SGACTAUTH=?
Test command returns the supported values for parameter <type>.