Telit Wireless Solutions ME310G1 - AT#SLEDSAV - Save STATLED GPIO Setting

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 537 of 1039 2021-09-23
Not Subject to NDA
3.10.6. AT#SLEDSAV - Save STAT_LED GPIO Setting
This command allows to save the current STAT_LED GPIO setting.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#SLEDSAV
Execution command saves the STAT_LED GPIO setting in NVM.
AT#SLEDSAV=?
Test command returns OK result code.