Telit Wireless Solutions ME310G1 - AT+CRCES - Reading Coverage Enhancement Status

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 300 of 1039 2021-09-23
Not Subject to NDA
3.3.43. AT+CRCES - Reading Coverage Enhancement Status
This execution command returns the coverage enhancement status of the MT. The
terminal can consider the coverage enhancement status prior to deciding to transmit.
Depending on the coverage enhancement status the terminal can refrain from
transmitting data.
The coverage enhancement status is only provided by the MT if the access technology of
the serving cell is CAT M1 or NB-IoT. If the access technology of the serving cell is
different, <Act>=0 is indicated.
[1] 3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CRCES
Additional info:
The execution command returns the following message.
+CRCES: <AcT>,<CE_level>,<CC>
Name
Type
Default
Description
<AcT>
integer
N/A
access technology of the serving
cell
Values:
0
:
Serving cell has no coverage enhancement
1
:
CAT M1
3
:
NB-IoT