Telit Wireless Solutions ME310G1 - AT+CSMP - Set Text Mode Parameters

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 389 of 1039 2021-09-23
Not Subject to NDA
3.6.5. AT+CSMP - Set Text Mode Parameters
This command is used to select values for additional parameters for storing and sending
SMS when the text mode is used (AT+CMGF=1).
3GPP TS 27.005
3GPP TS 03.40/23.040
3GPP TS 03.38/23.038
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Other
No
-
2
AT+CSMP=[<fo>[,<vp>[,<pid>[,<dcs>]]]]
Set command is used to select values for additional parameters for
storing and sending SMS when the text mode is used (AT+CMGF=1).
Parameters:
Name
Type
Default
Description
<fo>
integer
-
depending on the command or result code:
first octet of 3GPP TS 03.40/23.040 SMS-
DELIVER, SMS-SUBMIT (default 17), SMS-
STATUS-REPORT, or SMS-COMMAND
(default 2) in integer format.
<vp>
mixed
-
depending on SMS-SUBMIT <fo> setting:
3GPP TS 03.40/23.040 TP-Validity-Period
either in integer format (default 167) or in
quoted time-string format.
<pid>
integer
-
3GPP TS 03.40/23.040 TP-Protocol-Identifier
in integer format.
<dcs>
integer
-
depending on the command or result
code:
3GPP TS 03.38/23.038 SMS Data Coding
Scheme (default 0), or Cell Broadcast Data
Coding Scheme.